Router EDIMAX AR-7266WnB

Here you find how to configure and reset EDIMAX AR-7266WnB Router.

EDIMAX AR-7266WnB

Preconfigured wireless settings

SSID:
default
Password:
<blank>

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

  1. Turn on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Start web browser
  4. Enter IP address in the address bar and confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm

Reset EDIMAX AR-7266WnB router to factory defaults

To reset the EDIMAX AR-7266WnB to its default settings, you have to do the following steps:

  1. Switch on router
  2. Press WPS/Reset button for at least 10 seconds
  3. Restart of the device is automatically executed
  4. Router has been reset to factory settings

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

EDIMAX AR-7266WnB Router Security

Change EDIMAX AR-7266WnB Default Wifi Name (SSID)

Rename your EDIMAX AR-7266WnB Default Wifi Name (SSID). Some EDIMAX routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change EDIMAX AR-7266WnB Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your EDIMAX AR-7266WnB router and then use that password to access your wireless network. So it’s wise to change the administrator password for your EDIMAX AR-7266WnB router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for EDIMAX AR-7266WnB router

MAC filtering allows you to limit access to your EDIMAX AR-7266WnB router. To enable this feature, enter into your EDIMAX AR-7266WnB router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for EDIMAX AR-7266WnB router

EDIMAX AR-7266WnB router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for EDIMAX AR-7266WnB router

MAC filtering allows you to limit access to your EDIMAX AR-7266WnB router. To enable this feature, enter into your EDIMAX AR-7266WnB router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the EDIMAX AR-7266WnB router in the house?

You wouldn’t think about this at first, but where you place your EDIMAX AR-7266WnB also has a bearing on your security.

Place the EDIMAX AR-7266WnB router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your EDIMAX AR-7266WnB router next to a window, since there’s nothing to obstruct the signal going outside your house.