Router Keebox W150NR

Here you find how to configure and reset Keebox W150NR Router.

Keebox W150NR

Preconfigured wireless settings

SSID:
On a sticker on the router’s case
Password:
On a sticker on the router’s case

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username and password in the open interface and confirm once more

Reset Keebox W150NR router to factory defaults

To reset the Keebox W150NR to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Factory Reset button and hold for at least 15 seconds
  3. Device restarts automatically
  4. Default settings have been restored

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

Keebox W150NR Router Security

Change Keebox W150NR Default Wifi Name (SSID)

Rename your Keebox W150NR Default Wifi Name (SSID). Some Keebox routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change Keebox W150NR Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your Keebox W150NR router and then use that password to access your wireless network. So it’s wise to change the administrator password for your Keebox W150NR router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for Keebox W150NR router

MAC filtering allows you to limit access to your Keebox W150NR router. To enable this feature, enter into your Keebox W150NR router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for Keebox W150NR router

Keebox W150NR router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for Keebox W150NR router

MAC filtering allows you to limit access to your Keebox W150NR router. To enable this feature, enter into your Keebox W150NR router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the Keebox W150NR router in the house?

You wouldn’t think about this at first, but where you place your Keebox W150NR also has a bearing on your security.

Place the Keebox W150NR router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your Keebox W150NR router next to a window, since there’s nothing to obstruct the signal going outside your house.