Router LogiLink WL0067
Here you find how to configure and reset LogiLink WL0067 Router.
Login to LogiLink WL0067 Router
Open a web browser, such as Google Chrome, and enter the IP address of your router in the address bar.
Preconfigured wireless settings
Accessing your router's configuration interface
To connect to your router's web interface, follow these steps:
- Put router into operation
- Connect the device with router
- Open web browser
- Enter IP address in the address bar and confirm with ‘Enter’ key
- Enter username and password in the open user interface and confirm again
Reset LogiLink WL0067 router to factory defaults
To reset the LogiLink WL0067 to its default settings, you have to do the following steps:
- Switch on router
- Press Reset button and hold for at least 5 seconds
- Device restarts automatically
- Router has been reset to factory settings
The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.
LogiLink WL0067 Router Security
Change LogiLink WL0067 Default Wifi Name (SSID)
Rename your LogiLink WL0067 Default Wifi Name (SSID). Some LogiLink routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.
Change LogiLink WL0067 Default Password
It’s easy for a hacker to find out the manufacturer’s default password for your LogiLink WL0067 router and then use that password to access your wireless network. So it’s wise to change the administrator password for your LogiLink WL0067 router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.
MAC Address filtering for LogiLink WL0067 router
MAC filtering allows you to limit access to your LogiLink WL0067 router. To enable this feature, enter into your LogiLink WL0067 router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.
Disabling Broadcast SSID for LogiLink WL0067 router
LogiLink WL0067 router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.
MAC Address filtering for LogiLink WL0067 router
MAC filtering allows you to limit access to your LogiLink WL0067 router. To enable this feature, enter into your LogiLink WL0067 router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.
Where are you placing the LogiLink WL0067 router in the house?
You wouldn’t think about this at first, but where you place your LogiLink WL0067 also has a bearing on your security.
Place the LogiLink WL0067 router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.
For this reason, don’t place your LogiLink WL0067 router next to a window, since there’s nothing to obstruct the signal going outside your house.