Router Synology RT2600ac

Here you find how to configure and reset Synology RT2600ac Router.

Synology RT2600ac

Preconfigured wireless settings

SSID:
SynologyRouter
Password:
synology

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

  1. Switch on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open browser
  4. Enter IP address or URL in the address bar and then confirm with ‘Enter’ key
  5. Enter username in the open interface and confirm once more

Reset Synology RT2600ac router to factory defaults

To reset the Synology RT2600ac to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press RESET button and hold for at least 10 seconds
  3. Device restarts automatically
  4. Router has been reset to factory settings

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

Synology RT2600ac Router Security

Change Synology RT2600ac Default Wifi Name (SSID)

Rename your Synology RT2600ac Default Wifi Name (SSID). Some Synology routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change Synology RT2600ac Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your Synology RT2600ac router and then use that password to access your wireless network. So it’s wise to change the administrator password for your Synology RT2600ac router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for Synology RT2600ac router

MAC filtering allows you to limit access to your Synology RT2600ac router. To enable this feature, enter into your Synology RT2600ac router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for Synology RT2600ac router

Synology RT2600ac router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for Synology RT2600ac router

MAC filtering allows you to limit access to your Synology RT2600ac router. To enable this feature, enter into your Synology RT2600ac router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the Synology RT2600ac router in the house?

You wouldn’t think about this at first, but where you place your Synology RT2600ac also has a bearing on your security.

Place the Synology RT2600ac router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your Synology RT2600ac router next to a window, since there’s nothing to obstruct the signal going outside your house.