Router TRENDnet TEW-751DR

Here you find how to configure and reset TRENDnet TEW-751DR Router.

TRENDnet TEW-751DR

Preconfigured wireless settings

SSID:
On a sticker on the router’s case
Password:
On a sticker on the router’s case

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open browser
  4. Enter URL or IP address in the address bar and confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm

Reset TRENDnet TEW-751DR router to factory defaults

To reset the TRENDnet TEW-751DR to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press RESET button and hold for at least 10 seconds
  3. Device restarts automatically
  4. Restoration of standard settings is finished

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

TRENDnet TEW-751DR Router Security

Change TRENDnet TEW-751DR Default Wifi Name (SSID)

Rename your TRENDnet TEW-751DR Default Wifi Name (SSID). Some TRENDnet routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change TRENDnet TEW-751DR Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your TRENDnet TEW-751DR router and then use that password to access your wireless network. So it’s wise to change the administrator password for your TRENDnet TEW-751DR router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for TRENDnet TEW-751DR router

MAC filtering allows you to limit access to your TRENDnet TEW-751DR router. To enable this feature, enter into your TRENDnet TEW-751DR router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for TRENDnet TEW-751DR router

TRENDnet TEW-751DR router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for TRENDnet TEW-751DR router

MAC filtering allows you to limit access to your TRENDnet TEW-751DR router. To enable this feature, enter into your TRENDnet TEW-751DR router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the TRENDnet TEW-751DR router in the house?

You wouldn’t think about this at first, but where you place your TRENDnet TEW-751DR also has a bearing on your security.

Place the TRENDnet TEW-751DR router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your TRENDnet TEW-751DR router next to a window, since there’s nothing to obstruct the signal going outside your house.