Router Atlantis-Land A02-RA243-W54M

Here you find how to configure and reset Atlantis-Land A02-RA243-W54M Router.

Atlantis-Land A02-RA243-W54M

Preconfigured wireless settings

SSID:
On a sticker on the router’s case
Password:
On a sticker on the router’s case

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username and password in the open interface and confirm once more

Reset Atlantis-Land A02-RA243-W54M router to factory defaults

To reset the Atlantis-Land A02-RA243-W54M to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Factory Reset button and hold for at least 15 seconds
  3. Device restarts automatically
  4. Default settings have been restored

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

Atlantis-Land A02-RA243-W54M Router Security

Change Atlantis-Land A02-RA243-W54M Default Wifi Name (SSID)

Rename your Atlantis-Land A02-RA243-W54M Default Wifi Name (SSID). Some Atlantis-Land routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change Atlantis-Land A02-RA243-W54M Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your Atlantis-Land A02-RA243-W54M router and then use that password to access your wireless network. So it’s wise to change the administrator password for your Atlantis-Land A02-RA243-W54M router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for Atlantis-Land A02-RA243-W54M router

MAC filtering allows you to limit access to your Atlantis-Land A02-RA243-W54M router. To enable this feature, enter into your Atlantis-Land A02-RA243-W54M router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for Atlantis-Land A02-RA243-W54M router

Atlantis-Land A02-RA243-W54M router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for Atlantis-Land A02-RA243-W54M router

MAC filtering allows you to limit access to your Atlantis-Land A02-RA243-W54M router. To enable this feature, enter into your Atlantis-Land A02-RA243-W54M router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the Atlantis-Land A02-RA243-W54M router in the house?

You wouldn’t think about this at first, but where you place your Atlantis-Land A02-RA243-W54M also has a bearing on your security.

Place the Atlantis-Land A02-RA243-W54M router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your Atlantis-Land A02-RA243-W54M router next to a window, since there’s nothing to obstruct the signal going outside your house.